Router is a network device which works as a traffic controller. The main work of router is to choose a congestion free path through which the data packet will travel. Router receive data packets to the sender, analyse, and forward those data packets, then giving to receiver. It provides connection between two dis-similar type of network. Transmission rate is very high. It internally uses some algorithm to find out the congestion free path. It provides both wired and wireless facility. Router uses both LAN and WAN network. If you are sending message through a local network, the data firstly goes to the router. Router reads the address of the data or message, then it finds a congestion free route for the message, and sends to another router, this router also reads the address of the data or message, and then sends to the receiver.
Today here in this article we are going to tell you a step by step guide which help you to fix Wacom Tablet Driver error in your tablet.
How to access router:
Your router has a small computer in reality, so your router is there to take the internet connection from the modem, and to split it among the different computers plugged into your network. If you have only one then it’s only one. If you have multiple computers the router will route or send the information to all the computers that it sees.
- Some routers have an application that installs in the task, and the task bar in the bottom right, but for the most part a lot of routers are pretty much in the manual mode, where you have to figure out how to access your web browser.
- First thing you need is to access your web browser to get to the router’s menu.
- The menu and every router are made to be viewed through a web browser like a web page.
- Now you need to know what is the URL or what’s the address that you need to type in the address bar at the top to gain access to your router.
- To find that information you can actually query your own computer by going down to your network icon, right click on it,
- Go to network and sharing centre
- Click your connection is wi-fi
- It’s ethernet you’ll have the same type of connection.
- Click on it and will give you the information all you need with details.
- When you are on a router the ipv4 default gateway is in general the routers in IP address and it’s that same address that you need to put in your browser window.
- After acquiring the information:
- Open the address bar at the top
- Type 192.168.1.1 address, then press enter.
- This will give you an access
- Now, enter the username and the password.
- In many cases the default username is admin and the password is admin.
- Some routers have information on the bottom of the router, find it and then login.
How to login to router:
- Firstly, you need to press windows button and R button, this will open up the run menu.
- Type cmd which is command prompt, and hit enter.
- Once the cmd is opened, all you have to do is type ipconfig, then click enter.
- So, now what you are have to do is check the code in front of default gate way and select it, then press ctrl V to copy.
- Now, go ahead on to your browser, and paste this link in the address bar, and click enter.
- Usually, the username is admin or username, and the password is generally password.
- So, once you know the password and username, just type it in the pop up that opened up on your screen.
- Then, you’ll be logged into your router.
How to change router password:
- Open your web browser, then enter the URL in the address bar, such as http://routerlogin.net , or any other if you have.
- Enter the default username and password, then first get logged in. As the default username is admin and the password is password.
- After logging into the router.
- You’re going to head on over to the left-hand side.
- Click on the wireless option. Once you click on it, the page is going to load.
- This router and most routers now-a-days will support two different frequencies, one of them being 2.4, and one of them being a 5 gigahertz band.
- Here, 2.4 is going to be a bit slower, but it’s also going to give you a longer range in a longer area-of-effect.
- 5 gigahertz is faster, it has faster data transfer speed, but it’s got the less of a range.
- Now, go up to the top middle of the page, then click on change password.
- Enter the new password.
- Click submit.
- Now, your password will successfully change.
If you forgot your Epocrates login password, then below in this article you will get the complete information which helps you to recover your epocrates login password.
How to reset a router:
There are few ways to reset your routers.
- You can simply unplug your router. That means take out the plug, and then put it in.
- Some routers have a switch on them. So, you can actually just flip the switch to off and on the router will reset itself.
- You can also do it with the help of a rare and handy tool called a paper clip. You can just unfold it a little bit to get the sharp point out, and sometimes there will be a little reset switch right here that you can just click and that will reset the router.
- Sometimes, we have to do something called a hard reset.
- The hard reset, what it will do is it will wipe out the memory of the router. It will clean up so it will go back to being the way it was when we first bought it from store.
- The way we do a hard reset is by leaving the router connected and turned on, and then taking the clip and putting it in there. Pushing the button down for ten seconds.
- Once we are done the router will reset itself and completely forget all of the settings you put into it.